And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:30.737
And
I configure APT to prefer an old version of cowsay
0.028
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
31.103
And
I accept adding "cowsay" to Additional Software
6.413
And
Additional Software is correctly configured for package "cowsay"
1.864
And
I shutdown Tails and wait for the computer to power off
6.522
And
I start Tails from USB drive "__internal" with network unplugged
1:10.041
And
I enable persistence
16.931
And
I configure APT to prefer an old version of cowsay
0.052
And
I disable the tails-virt-notify-user.service user unit
0.151
And
I log in to a new session
46.112
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
32.180
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.058
And
I prepare the Additional Software upgrade process to fail
0.084
And
the network is plugged
0.094
And
available upgrades have been checked
1.182
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
5.485
And
I can open the Additional Software configuration window from the notification
3.161
And
I shutdown Tails and wait for the computer to power off
19.739
And
I start Tails from USB drive "__internal" with network unplugged
59.997
And
I enable persistence
12.080
And
I configure APT to prefer an old version of cowsay
0.028
And
I log in to a new session
39.660
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.691
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.062
And
the network is plugged
0.068
Then
the Additional Software upgrade service has started
0.195
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.111