And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:27.467
And
I configure APT to prefer an old version of cowsay
0.028
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
25.651
And
I accept adding "cowsay" to Additional Software
6.854
And
Additional Software is correctly configured for package "cowsay"
0.913
And
I shutdown Tails and wait for the computer to power off
6.458
And
I start Tails from USB drive "__internal" with network unplugged
59.655
And
I enable persistence
12.980
And
I configure APT to prefer an old version of cowsay
0.027
And
I disable the tails-virt-notify-user.service user unit
0.092
And
I log in to a new session
42.630
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
32.712
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.056
And
I prepare the Additional Software upgrade process to fail
0.089
And
the network is plugged
0.176
And
available upgrades have been checked
5.645
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.742
And
I can open the Additional Software configuration window from the notification
3.230
And
I shutdown Tails and wait for the computer to power off
18.499
And
I start Tails from USB drive "__internal" with network unplugged
58.736
And
I enable persistence
10.702
And
I configure APT to prefer an old version of cowsay
0.026
And
I log in to a new session
37.985
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
42.405
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.060
And
the network is plugged
0.075
Then
the Additional Software upgrade service has started
0.161
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.095