And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:18.242
And
I configure APT to prefer an old version of cowsay
0.034
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
26.165
And
I accept adding "cowsay" to Additional Software
5.737
And
Additional Software is correctly configured for package "cowsay"
0.848
And
I shutdown Tails and wait for the computer to power off
6.449
And
I start Tails from USB drive "__internal" with network unplugged
1:5.169
And
I enable persistence
9.948
And
I configure APT to prefer an old version of cowsay
0.028
And
I disable the tails-virt-notify-user.service user unit
0.084
And
I log in to a new session
38.585
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.806
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.084
And
I prepare the Additional Software upgrade process to fail
0.075
And
the network is plugged
0.062
And
available upgrades have been checked
2.465
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.571
And
I can open the Additional Software configuration window from the notification
3.285
And
I shutdown Tails and wait for the computer to power off
18.104
And
I start Tails from USB drive "__internal" with network unplugged
59.900
And
I enable persistence
12.977
And
I configure APT to prefer an old version of cowsay
0.025
And
I log in to a new session
41.285
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.369
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.075
And
the network is plugged
0.086
Then
the Additional Software upgrade service has started
0.194
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.094