And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:26.214
And
I configure APT to prefer an old version of cowsay
0.037
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
26.164
And
I accept adding "cowsay" to Additional Software
6.662
And
Additional Software is correctly configured for package "cowsay"
0.980
And
I shutdown Tails and wait for the computer to power off
6.311
And
I start Tails from USB drive "__internal" with network unplugged
1:2.700
And
I enable persistence
14.548
And
I configure APT to prefer an old version of cowsay
0.034
And
I log in to a new session
41.760
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.715
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.060
And
I prepare the Additional Software upgrade process to fail
0.076
And
the network is plugged
0.070
And
all notifications have disappeared
7.702
And
available upgrades have been checked
0.076
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.114
And
I can open the Additional Software configuration window from the notification
3.433
And
I shutdown Tails and wait for the computer to power off
2:3.023
And
I start Tails from USB drive "__internal" with network unplugged
59.680
And
I enable persistence
12.822
And
I configure APT to prefer an old version of cowsay
0.025
And
I log in to a new session
39.913
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.498
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.069
And
the network is plugged
0.081
Then
the Additional Software upgrade service has started
0.199
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.090