And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:21.319
And
I configure APT to prefer an old version of cowsay
0.026
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
25.353
And
I accept adding "cowsay" to Additional Software
6.901
And
Additional Software is correctly configured for package "cowsay"
0.909
And
I shutdown Tails and wait for the computer to power off
6.542
And
I start Tails from USB drive "__internal" with network unplugged
58.862
And
I enable persistence
12.850
And
I configure APT to prefer an old version of cowsay
0.026
And
I log in to a new session
39.176
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.083
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.059
And
I prepare the Additional Software upgrade process to fail
0.065
And
the network is plugged
0.065
And
all notifications have disappeared
5.632
And
available upgrades have been checked
0.072
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.160
And
I can open the Additional Software configuration window from the notification
2.694
And
I shutdown Tails and wait for the computer to power off
2:7.076
And
I start Tails from USB drive "__internal" with network unplugged
1:0.142
And
I enable persistence
13.284
And
I configure APT to prefer an old version of cowsay
0.026
And
I log in to a new session
35.869
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
42.402
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.053
And
the network is plugged
0.066
Then
the Additional Software upgrade service has started
0.176
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.098