And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:34.540
And
I configure APT to prefer an old version of cowsay
0.032
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
29.155
And
I accept adding "cowsay" to Additional Software
4.701
And
Additional Software is correctly configured for package "cowsay"
0.988
And
I shutdown Tails and wait for the computer to power off
6.347
And
I start Tails from USB drive "__internal" with network unplugged
1:3.298
And
I enable persistence
12.100
And
I configure APT to prefer an old version of cowsay
0.031
And
I log in to a new session
42.059
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.044
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.052
And
I prepare the Additional Software upgrade process to fail
0.073
And
the network is plugged
0.076
And
all notifications have disappeared
6.250
And
available upgrades have been checked
0.132
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.424
And
I can open the Additional Software configuration window from the notification
3.225
And
I shutdown Tails and wait for the computer to power off
12.876
And
I start Tails from USB drive "__internal" with network unplugged
1:1.916
And
I enable persistence
11.596
And
I configure APT to prefer an old version of cowsay
0.028
And
I log in to a new session
42.076
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
42.329
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.057
And
the network is plugged
0.065
Then
the Additional Software upgrade service has started
0.190
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.110