And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:28.974
And
I configure APT to prefer an old version of cowsay
0.033
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
25.501
And
I accept adding "cowsay" to Additional Software
6.781
And
Additional Software is correctly configured for package "cowsay"
0.941
And
I shutdown Tails and wait for the computer to power off
6.546
And
I start Tails from USB drive "__internal" with network unplugged
1:0.574
And
I enable persistence
11.540
And
I configure APT to prefer an old version of cowsay
0.036
And
I log in to a new session
38.879
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.592
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.061
And
I prepare the Additional Software upgrade process to fail
0.077
And
the network is plugged
0.080
And
all notifications have disappeared
6.701
And
available upgrades have been checked
0.068
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.195
And
I can open the Additional Software configuration window from the notification
3.118
And
I shutdown Tails and wait for the computer to power off
2:8.671
And
I start Tails from USB drive "__internal" with network unplugged
59.582
And
I enable persistence
12.250
And
I configure APT to prefer an old version of cowsay
0.026
And
I log in to a new session
41.630
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
42.089
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.059
And
the network is plugged
0.099
Then
the Additional Software upgrade service has started
0.193
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.102