And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:21.284
And
I configure APT to prefer an old version of cowsay
0.024
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
25.128
And
I accept adding "cowsay" to Additional Software
5.365
And
Additional Software is correctly configured for package "cowsay"
0.881
And
I shutdown Tails and wait for the computer to power off
6.279
And
I start Tails from USB drive "__internal" with network unplugged
57.110
And
I enable persistence
11.064
And
I configure APT to prefer an old version of cowsay
0.026
And
I log in to a new session
37.228
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.669
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.054
And
I prepare the Additional Software upgrade process to fail
0.061
And
the network is plugged
0.078
And
all notifications have disappeared
6.912
And
available upgrades have been checked
0.100
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.144
And
I can open the Additional Software configuration window from the notification
2.593
And
I shutdown Tails and wait for the computer to power off
2:2.985
And
I start Tails from USB drive "__internal" with network unplugged
1:5.252
And
I enable persistence
11.084
And
I configure APT to prefer an old version of cowsay
0.024
And
I log in to a new session
38.533
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.570
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.060
And
the network is plugged
0.076
Then
the Additional Software upgrade service has started
0.170
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.089