And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:19.210
And
I configure APT to prefer an old version of cowsay
0.024
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
25.956
And
I accept adding "cowsay" to Additional Software
7.155
And
Additional Software is correctly configured for package "cowsay"
0.946
And
I shutdown Tails and wait for the computer to power off
6.331
And
I start Tails from USB drive "__internal" with network unplugged
58.069
And
I enable persistence
10.277
And
I configure APT to prefer an old version of cowsay
0.024
And
I log in to a new session
37.294
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.573
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.059
And
I prepare the Additional Software upgrade process to fail
0.079
And
the network is plugged
0.069
And
all notifications have disappeared
6.647
And
available upgrades have been checked
0.055
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.100
And
I can open the Additional Software configuration window from the notification
3.713
And
I shutdown Tails and wait for the computer to power off
2:7.454
And
I start Tails from USB drive "__internal" with network unplugged
57.201
And
I enable persistence
12.175
And
I configure APT to prefer an old version of cowsay
0.028
And
I log in to a new session
38.955
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.292
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.058
And
the network is plugged
0.064
Then
the Additional Software upgrade service has started
0.160
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.096