And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:12.257
And
I configure APT to prefer an old version of cowsay
0.024
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
26.259
And
I accept adding "cowsay" to Additional Software
8.017
And
Additional Software is correctly configured for package "cowsay"
0.879
And
I shutdown Tails and wait for the computer to power off
6.728
And
I start Tails from USB drive "__internal" with network unplugged
56.699
And
I enable persistence
9.443
And
I configure APT to prefer an old version of cowsay
0.028
And
I log in to a new session
37.003
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.193
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.051
And
I prepare the Additional Software upgrade process to fail
0.067
And
the network is plugged
0.063
And
all notifications have disappeared
8.276
And
available upgrades have been checked
0.055
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.116
And
I can open the Additional Software configuration window from the notification
3.130
And
I shutdown Tails and wait for the computer to power off
2:7.368
And
I start Tails from USB drive "__internal" with network unplugged
56.615
And
I enable persistence
12.371
And
I configure APT to prefer an old version of cowsay
0.024
And
I log in to a new session
43.120
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.702
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.062
And
the network is plugged
0.073
Then
the Additional Software upgrade service has started
0.162
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.067