And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:19.839
And
I configure APT to prefer an old version of cowsay
0.027
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
26.857
And
I accept adding "cowsay" to Additional Software
7.501
And
Additional Software is correctly configured for package "cowsay"
0.797
And
I shutdown Tails and wait for the computer to power off
6.497
And
I start Tails from USB drive "__internal" with network unplugged
59.286
And
I enable persistence
14.245
And
I configure APT to prefer an old version of cowsay
0.026
And
I log in to a new session
36.227
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.259
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.058
And
I prepare the Additional Software upgrade process to fail
0.073
And
the network is plugged
0.079
And
all notifications have disappeared
7.468
And
available upgrades have been checked
0.108
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.543
And
I can open the Additional Software configuration window from the notification
3.566
And
I shutdown Tails and wait for the computer to power off
17.705
And
I start Tails from USB drive "__internal" with network unplugged
58.572
And
I enable persistence
11.570
And
I configure APT to prefer an old version of cowsay
0.028
And
I log in to a new session
39.454
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.744
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.056
And
the network is plugged
0.060
Then
the Additional Software upgrade service has started
0.237
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.126