And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:25.858
And
I configure APT to prefer an old version of cowsay
0.026
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
26.539
And
I accept adding "cowsay" to Additional Software
6.779
And
Additional Software is correctly configured for package "cowsay"
0.873
And
I shutdown Tails and wait for the computer to power off
6.504
And
I start Tails from USB drive "__internal" with network unplugged
57.823
And
I enable persistence
12.672
And
I configure APT to prefer an old version of cowsay
0.029
And
I log in to a new session
36.555
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.019
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.075
And
I prepare the Additional Software upgrade process to fail
0.089
And
the network is plugged
0.118
And
all notifications have disappeared
7.622
And
available upgrades have been checked
0.061
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.023
And
I can open the Additional Software configuration window from the notification
3.085
And
I shutdown Tails and wait for the computer to power off
17.563
And
I start Tails from USB drive "__internal" with network unplugged
59.439
And
I enable persistence
13.269
And
I configure APT to prefer an old version of cowsay
0.025
And
I log in to a new session
44.479
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.980
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.055
And
the network is plugged
0.065
Then
the Additional Software upgrade service has started
0.159
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.156