And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:21.926
And
I configure APT to prefer an old version of cowsay
0.029
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
27.130
And
I accept adding "cowsay" to Additional Software
9.331
And
Additional Software is correctly configured for package "cowsay"
1.000
And
I shutdown Tails and wait for the computer to power off
6.279
And
I start Tails from USB drive "__internal" with network unplugged
1:0.706
And
I enable persistence
13.656
And
I configure APT to prefer an old version of cowsay
0.032
And
I log in to a new session
46.623
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
32.051
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.055
And
I prepare the Additional Software upgrade process to fail
0.076
And
the network is plugged
0.076
And
all notifications have disappeared
9.403
And
available upgrades have been checked
0.180
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.183
And
I can open the Additional Software configuration window from the notification
3.815
And
I shutdown Tails and wait for the computer to power off
12.943
And
I start Tails from USB drive "__internal" with network unplugged
1:2.352
And
I enable persistence
12.202
And
I configure APT to prefer an old version of cowsay
0.026
And
I log in to a new session
37.464
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.150
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.064
And
the network is plugged
0.084
Then
the Additional Software upgrade service has started
0.158
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.084