And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:16.724
And
I configure APT to prefer an old version of cowsay
0.026
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
26.359
And
I accept adding "cowsay" to Additional Software
7.039
And
Additional Software is correctly configured for package "cowsay"
0.833
And
I shutdown Tails and wait for the computer to power off
6.364
And
I start Tails from USB drive "__internal" with network unplugged
59.388
And
I enable persistence
12.266
And
I configure APT to prefer an old version of cowsay
0.026
And
I log in to a new session
37.892
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
42.149
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.048
And
I prepare the Additional Software upgrade process to fail
0.071
And
the network is plugged
0.052
And
all notifications have disappeared
6.921
And
available upgrades have been checked
0.337
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.539
And
I can open the Additional Software configuration window from the notification
4.479
And
I shutdown Tails and wait for the computer to power off
2:2.513
And
I start Tails from USB drive "__internal" with network unplugged
57.433
And
I enable persistence
10.519
And
I configure APT to prefer an old version of cowsay
0.030
And
I log in to a new session
37.426
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
42.405
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.058
And
the network is plugged
0.042
Then
the Additional Software upgrade service has started
0.162
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.091