And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:27.271
And
I configure APT to prefer an old version of cowsay
0.035
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
30.597
And
I accept adding "cowsay" to Additional Software
4.981
And
Additional Software is correctly configured for package "cowsay"
0.886
And
I shutdown Tails and wait for the computer to power off
6.477
And
I start Tails from USB drive "__internal" with network unplugged
1:1.687
And
I enable persistence
13.784
And
I configure APT to prefer an old version of cowsay
0.027
And
I log in to a new session
39.158
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.103
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.060
And
I prepare the Additional Software upgrade process to fail
0.067
And
the network is plugged
0.056
And
all notifications have disappeared
9.234
And
available upgrades have been checked
0.136
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.195
And
I can open the Additional Software configuration window from the notification
4.027
And
I shutdown Tails and wait for the computer to power off
14.361
And
I start Tails from USB drive "__internal" with network unplugged
1:0.780
And
I enable persistence
11.391
And
I configure APT to prefer an old version of cowsay
0.025
And
I log in to a new session
39.453
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
42.228
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.078
And
the network is plugged
0.291
Then
the Additional Software upgrade service has started
0.224
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.103