And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:27.667
And
I configure APT to prefer an old version of cowsay
0.030
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
26.747
And
I accept adding "cowsay" to Additional Software
7.613
And
Additional Software is correctly configured for package "cowsay"
0.901
And
I shutdown Tails and wait for the computer to power off
6.425
And
I start Tails from USB drive "__internal" with network unplugged
1:0.522
And
I enable persistence
13.377
And
I configure APT to prefer an old version of cowsay
0.028
And
I log in to a new session
34.140
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.012
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.090
And
I prepare the Additional Software upgrade process to fail
0.059
And
the network is plugged
0.044
And
all notifications have disappeared
8.146
And
available upgrades have been checked
0.114
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.906
And
I can open the Additional Software configuration window from the notification
3.085
And
I shutdown Tails and wait for the computer to power off
14.792
And
I start Tails from USB drive "__internal" with network unplugged
1:5.180
And
I enable persistence
11.623
And
I configure APT to prefer an old version of cowsay
0.027
And
I log in to a new session
37.768
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
42.038
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.062
And
the network is plugged
0.054
Then
the Additional Software upgrade service has started
0.180
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.098