And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:25.800
And
I configure APT to prefer an old version of cowsay
0.039
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
31.779
And
I accept adding "cowsay" to Additional Software
4.328
And
Additional Software is correctly configured for package "cowsay"
1.178
And
I shutdown Tails and wait for the computer to power off
6.769
And
I start Tails from USB drive "__internal" with network unplugged
58.473
And
I enable persistence
13.378
And
I configure APT to prefer an old version of cowsay
0.026
And
I log in to a new session
38.703
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.212
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.086
And
I prepare the Additional Software upgrade process to fail
0.076
And
the network is plugged
0.036
And
all notifications have disappeared
8.976
And
available upgrades have been checked
0.122
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.539
And
I can open the Additional Software configuration window from the notification
3.868
And
I shutdown Tails and wait for the computer to power off
2:6.830
And
I start Tails from USB drive "__internal" with network unplugged
1:2.431
And
I enable persistence
13.538
And
I configure APT to prefer an old version of cowsay
0.028
And
I log in to a new session
44.603
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.466
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.065
And
the network is plugged
0.044
Then
the Additional Software upgrade service has started
0.190
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.088