And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:18.112
And
I configure APT to prefer an old version of cowsay
0.024
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
26.132
And
I accept adding "cowsay" to Additional Software
7.859
And
Additional Software is correctly configured for package "cowsay"
0.952
And
I shutdown Tails and wait for the computer to power off
6.542
And
I start Tails from USB drive "__internal" with network unplugged
57.965
And
I enable persistence
11.463
And
I configure APT to prefer an old version of cowsay
0.025
And
I log in to a new session
38.425
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
42.172
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.068
And
I prepare the Additional Software upgrade process to fail
0.074
And
the network is plugged
0.049
And
all notifications have disappeared
6.243
And
available upgrades have been checked
0.164
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.419
And
I can open the Additional Software configuration window from the notification
3.480
And
I shutdown Tails and wait for the computer to power off
2:8.514
And
I start Tails from USB drive "__internal" with network unplugged
58.264
And
I enable persistence
12.457
And
I configure APT to prefer an old version of cowsay
0.027
And
I log in to a new session
37.911
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
42.469
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.053
And
the network is plugged
0.036
Then
the Additional Software upgrade service has started
0.178
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.080