And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:17.534
And
I configure APT to prefer an old version of cowsay
0.031
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
27.103
And
I accept adding "cowsay" to Additional Software
8.630
And
Additional Software is correctly configured for package "cowsay"
1.014
And
I shutdown Tails and wait for the computer to power off
6.450
And
I start Tails from USB drive "__internal" with network unplugged
59.169
And
I enable persistence
10.680
And
I configure APT to prefer an old version of cowsay
0.027
And
I log in to a new session
37.091
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.349
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.059
And
I prepare the Additional Software upgrade process to fail
0.069
And
the network is plugged
0.046
And
all notifications have disappeared
6.578
And
available upgrades have been checked
0.112
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
4.593
And
I can open the Additional Software configuration window from the notification
3.601
And
I shutdown Tails and wait for the computer to power off
19.573
And
I start Tails from USB drive "__internal" with network unplugged
58.107
And
I enable persistence
13.063
And
I configure APT to prefer an old version of cowsay
0.026
And
I log in to a new session
38.602
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.999
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.059
And
the network is plugged
0.049
Then
the Additional Software upgrade service has started
0.205
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.109