And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:27.526
And
I configure APT to prefer an old version of cowsay
0.027
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
27.553
And
I accept adding "cowsay" to Additional Software
7.611
And
Additional Software is correctly configured for package "cowsay"
0.917
And
I shutdown Tails and wait for the computer to power off
6.481
And
I start Tails from USB drive "__internal" with network unplugged
59.446
And
I enable persistence
11.560
And
I configure APT to prefer an old version of cowsay
0.022
And
I log in to a new session
39.349
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.192
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.070
And
I prepare the Additional Software upgrade process to fail
0.085
And
the network is plugged
0.043
And
all notifications have disappeared
7.753
And
available upgrades have been checked
0.471
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.838
And
I can open the Additional Software configuration window from the notification
3.438
And
I shutdown Tails and wait for the computer to power off
2:8.577
And
I start Tails from USB drive "__internal" with network unplugged
1:1.034
And
I enable persistence
13.612
And
I configure APT to prefer an old version of cowsay
0.026
And
I log in to a new session
37.998
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
42.113
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.059
And
the network is plugged
0.035
Then
the Additional Software upgrade service has started
0.183
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.100