And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:20.975
And
I configure APT to prefer an old version of cowsay
0.024
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
27.041
And
I accept adding "cowsay" to Additional Software
5.254
And
Additional Software is correctly configured for package "cowsay"
0.826
And
I shutdown Tails and wait for the computer to power off
6.443
And
I start Tails from USB drive "__internal" with network unplugged
58.070
And
I enable persistence
13.481
And
I configure APT to prefer an old version of cowsay
0.032
And
I log in to a new session
40.694
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.496
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.060
And
I prepare the Additional Software upgrade process to fail
0.069
And
the network is plugged
0.039
And
all notifications have disappeared
8.029
And
available upgrades have been checked
0.151
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.320
And
I can open the Additional Software configuration window from the notification
3.977
And
I shutdown Tails and wait for the computer to power off
2:7.730
And
I start Tails from USB drive "__internal" with network unplugged
1:3.110
And
I enable persistence
11.080
And
I configure APT to prefer an old version of cowsay
0.025
And
I log in to a new session
42.025
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.450
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.081
And
the network is plugged
0.051
Then
the Additional Software upgrade service has started
0.166
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.095