And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:25.561
And
I configure APT to prefer an old version of cowsay
0.025
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
26.548
And
I accept adding "cowsay" to Additional Software
5.998
And
Additional Software is correctly configured for package "cowsay"
1.140
And
I shutdown Tails and wait for the computer to power off
6.486
And
I start Tails from USB drive "__internal" with network unplugged
1:0.437
And
I enable persistence
11.996
And
I configure APT to prefer an old version of cowsay
0.040
And
I log in to a new session
37.140
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.922
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.048
And
I prepare the Additional Software upgrade process to fail
0.082
And
the network is plugged
0.046
And
all notifications have disappeared
7.275
And
available upgrades have been checked
0.062
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.239
And
I can open the Additional Software configuration window from the notification
2.862
And
I shutdown Tails and wait for the computer to power off
14.867
And
I start Tails from USB drive "__internal" with network unplugged
59.847
And
I enable persistence
12.530
And
I configure APT to prefer an old version of cowsay
0.023
And
I log in to a new session
37.145
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.333
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.065
And
the network is plugged
0.043
Then
the Additional Software upgrade service has started
0.160
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.085