And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:53.694
And
I configure APT to prefer an old version of cowsay
0.027
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
27.282
And
I accept adding "cowsay" to Additional Software
5.459
And
Additional Software is correctly configured for package "cowsay"
1.049
And
I shutdown Tails and wait for the computer to power off
6.677
And
I start Tails from USB drive "__internal" with network unplugged
1:2.760
And
I enable persistence
14.486
And
I configure APT to prefer an old version of cowsay
0.030
And
I log in to a new session
33.734
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
40.841
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.069
And
I prepare the Additional Software upgrade process to fail
0.068
And
the network is plugged
0.039
And
all notifications have disappeared
7.566
And
available upgrades have been checked
0.093
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.117
And
I can open the Additional Software configuration window from the notification
3.317
And
I shutdown Tails and wait for the computer to power off
19.363
And
I start Tails from USB drive "__internal" with network unplugged
1:0.768
And
I enable persistence
13.206
And
I configure APT to prefer an old version of cowsay
0.024
And
I log in to a new session
38.226
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
41.253
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.054
And
the network is plugged
0.064
Then
the Additional Software upgrade service has started
0.233
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.106