Cucumber Reports (no 4837) - Feature: Installing Tails to a USB drive

Project	Number	Date
test_Tails_ISO_stable	4837	10 May 2024, 12:22

	Steps	Scenarios	Features
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	27:29.736	Passed

Tags: @product @not_release_blocker

28.257

Scenario Try installing Tails to a too small USB drive with GPT and a FAT partition

Hooks

Before features/support/hooks.rb:259 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.959

And I temporarily create a 4 GiB disk named "gptfat" 0.078

And I create a gpt partition with a vfat filesystem on disk "gptfat" 6.397

And I plug USB drive "gptfat" 2.534

When I start Tails Installer 10.222

Then I am told by Tails Installer that the destination device "is too small" 0.064

Hooks

After features/support/hooks.rb:305 0.949

After features/support/hooks.rb:89 0.001

Tags: @product

20.301

Scenario Detecting when a target USB drive is inserted or removed

Hooks

Before features/support/hooks.rb:259 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.816

And I temporarily create a 7200 MiB disk named "temp" 0.098

And I start Tails Installer 8.443

But a suitable USB device is not found 0.021

When I plug USB drive "temp" 2.629

Then the "temp" USB drive is selected 0.081

When I unplug USB drive "temp" 0.186

Then a suitable USB device is not found 0.023

Hooks

After features/support/hooks.rb:305 0.942

After features/support/hooks.rb:89 0.000

Tags: @product

4:12.458

Scenario Installing Tails with Tails Installer to a used USB drive

Hooks

Before features/support/hooks.rb:259 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.116

And I temporarily create a 7200 MiB disk named "install" 0.071

And I create a gpt partition with a vfat filesystem on disk "install" 6.506

And I plug USB drive "install" 2.612

And I install Tails to USB drive "install" by cloning 3:40.519

Then the running Tails is installed on USB drive "install" 14.527

But there is no persistence partition on USB drive "install" 0.104

Hooks

After features/support/hooks.rb:305 1.453

After features/support/hooks.rb:89 0.124

Tags: @product

4:1.354

Scenario Installing Tails with Tails Installer to a pristine USB drive

Hooks

Before features/support/hooks.rb:259 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.231

And I temporarily create a 7200 MiB disk named "install" 0.100

And I plug USB drive "install" 2.644

And I install Tails to USB drive "install" by cloning 3:36.981

Then the running Tails is installed on USB drive "install" 13.327

But there is no persistence partition on USB drive "install" 0.069

Hooks

After features/support/hooks.rb:305 1.112

After features/support/hooks.rb:89 0.129

Tags: @product

4:57.558

Scenario Installing Tails with Tails Installer to a used USB drive, cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:259 0.002

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 46.895

And I create a file in the Persistent directory 0.103

And I temporarily create a 7200 MiB disk named "install" 0.066

And I create a gpt partition with a vfat filesystem on disk "install" 6.477

And I plug USB drive "install" 2.452

And I install Tails with Persistent Storage to USB drive "install" by cloning 3:42.266

Then the running Tails is installed on USB drive "install" 13.878

And there is a persistence partition on USB drive "install" 0.065

And the USB drive "install" contains the same files as my persistent storage 5.352

Hooks

After features/support/hooks.rb:305 1.859

After features/support/hooks.rb:89 0.132

Tags: @product

3:58.154

Scenario Installing Tails with Tails Installer to a pristine USB drive, without cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:259 0.003

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 14.768

And I temporarily create a 7200 MiB disk named "install" 0.053

And I plug USB drive "install" 2.482

And I install Tails to USB drive "install" by cloning 3:23.158

Then the running Tails is installed on USB drive "install" 17.579

And there is no persistence partition on USB drive "install" 0.110

Hooks

After features/support/hooks.rb:305 1.168

After features/support/hooks.rb:89 0.092

Tags: @product

4:4.204

Scenario Re-installing Tails over an existing USB installation with a persistent partition

Hooks

Before features/support/hooks.rb:259 0.002

Steps

# We reach this first checkpoint only to ensure that the ' __internal' disk has reached the state (Tails installed + persistent partition set up) we need before we clone it below.

# This first part is done without Tails Installer (install from Tails USB image)

# Note: the "__internal" disk will keep its state across scenarios

# and features until one of its snapshots is restored.

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 9.251

And I have started Tails from DVD without network and logged in 9.533

And I clone USB drive "__internal" to a temporary USB drive "install" 1.267

And I plug USB drive "install" 2.574

# This second part is done with Tails Installer, that's what this scenario is about

When I reinstall Tails to USB drive "install" by cloning 3:25.902

Then the running Tails is installed on USB drive "install" 15.612

And there is no persistence partition on USB drive "install" 0.061

Hooks

After features/support/hooks.rb:305 2.202

After features/support/hooks.rb:89 0.138

Tags: @product @uefi

2:11.609

Scenario Booting Tails from a USB drive in UEFI mode

Hooks

Before features/support/hooks.rb:259 0.003

Steps

Given I have started Tails without network from a USB drive without a persistent partition and stopped at Tails Greeter's login screen 22.788

And I power off the computer 0.368

And the computer is set to boot in UEFI mode 0.037

When I start Tails from USB drive "__internal" with network unplugged and I login 1:44.800

Then Tails is running from USB drive "__internal" 0.404

And the boot device has safe access rights 3.136

And Tails has started in UEFI mode 0.074

Hooks

After features/support/hooks.rb:305 0.865

After features/support/hooks.rb:89 0.005

Tags: @product

1:47.199

Scenario Installing Tails with GNOME Disks from a USB image

Hooks

Before features/support/hooks.rb:259 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.890

And I plug and mount a USB drive containing a Tails USB image 42.407

And I create a 7200 MiB disk named "usbimage" 0.049

And I plug USB drive "usbimage" 2.415

And I install a Tails USB image to the 7200 MiB disk with GNOME Disks 53.437

Hooks

After features/support/hooks.rb:305 2.628

After features/support/hooks.rb:89 0.098

Tags: @product

1:28.638

Scenario The system partition is updated when booting from a USB drive where a Tails USB image was copied

Hooks

Before features/support/hooks.rb:259 0.002

Steps

Given a computer 0.174

And I start Tails from USB drive "usbimage" with network unplugged and I login 1:27.288

Then Tails is running from USB drive "usbimage" 0.322

And the label of the system partition on "usbimage" is "Tails" 0.294

And the system partition on "usbimage" is an EFI system partition 0.151

And the FAT filesystem on the system partition on "usbimage" is at least 4000M large 0.162

And the UUID of the FAT filesystem on the system partition on "usbimage" was randomized 0.082

And the label of the FAT filesystem on the system partition on "usbimage" is "TAILS" 0.082

And the system partition on "usbimage" has the expected flags 0.080

Hooks

After features/support/hooks.rb:305 0.681

After features/support/hooks.rb:89 0.006

	Steps						Scenarios			Features
Feature	Passed	Failed	Skipped	Pending	Undefined	Total	Passed	Failed	Total	Duration	Status
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	27:29.736	Passed

Feature Report