Cucumber Reports (no 4826) - Feature: Installing Tails to a USB drive

Project	Number	Date
test_Tails_ISO_stable	4826	04 May 2024, 12:09

	Steps	Scenarios	Features
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	25:33.568	Passed

Tags: @product @not_release_blocker

25.245

Scenario Try installing Tails to a too small USB drive with GPT and a FAT partition

Hooks

Before features/support/hooks.rb:259 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.034

And I temporarily create a 4 GiB disk named "gptfat" 0.064

And I create a gpt partition with a vfat filesystem on disk "gptfat" 6.193

And I plug USB drive "gptfat" 2.454

When I start Tails Installer 8.443

Then I am told by Tails Installer that the destination device "is too small" 0.054

Hooks

After features/support/hooks.rb:305 0.670

After features/support/hooks.rb:89 0.001

Tags: @product

19.678

Scenario Detecting when a target USB drive is inserted or removed

Hooks

Before features/support/hooks.rb:259 0.002

Steps

Given I have started Tails from DVD without network and logged in 8.019

And I temporarily create a 7200 MiB disk named "temp" 0.055

And I start Tails Installer 8.818

But a suitable USB device is not found 0.024

When I plug USB drive "temp" 2.474

Then the "temp" USB drive is selected 0.090

When I unplug USB drive "temp" 0.176

Then a suitable USB device is not found 0.020

Hooks

After features/support/hooks.rb:305 1.609

After features/support/hooks.rb:89 0.000

Tags: @product

3:44.541

Scenario Installing Tails with Tails Installer to a used USB drive

Hooks

Before features/support/hooks.rb:259 0.003

Steps

Given I have started Tails from DVD without network and logged in 8.025

And I temporarily create a 7200 MiB disk named "install" 0.045

And I create a gpt partition with a vfat filesystem on disk "install" 6.354

And I plug USB drive "install" 2.513

And I install Tails to USB drive "install" by cloning 3:15.897

Then the running Tails is installed on USB drive "install" 11.636

But there is no persistence partition on USB drive "install" 0.068

Hooks

After features/support/hooks.rb:305 1.168

After features/support/hooks.rb:89 0.112

Tags: @product

3:40.944

Scenario Installing Tails with Tails Installer to a pristine USB drive

Hooks

Before features/support/hooks.rb:259 0.003

Steps

Given I have started Tails from DVD without network and logged in 8.214

And I temporarily create a 7200 MiB disk named "install" 0.056

And I plug USB drive "install" 2.519

And I install Tails to USB drive "install" by cloning 3:17.090

Then the running Tails is installed on USB drive "install" 12.986

But there is no persistence partition on USB drive "install" 0.076

Hooks

After features/support/hooks.rb:305 1.382

After features/support/hooks.rb:89 0.113

Tags: @product

4:25.652

Scenario Installing Tails with Tails Installer to a used USB drive, cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:259 0.003

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 16.689

And I create a file in the Persistent directory 0.073

And I temporarily create a 7200 MiB disk named "install" 0.047

And I create a gpt partition with a vfat filesystem on disk "install" 6.407

And I plug USB drive "install" 2.408

And I install Tails with Persistent Storage to USB drive "install" by cloning 3:42.820

Then the running Tails is installed on USB drive "install" 13.654

And there is a persistence partition on USB drive "install" 0.073

And the USB drive "install" contains the same files as my persistent storage 3.479

Hooks

After features/support/hooks.rb:305 1.950

After features/support/hooks.rb:89 0.122

Tags: @product

3:49.607

Scenario Installing Tails with Tails Installer to a pristine USB drive, without cloning the Persistent Storage

Hooks

Before features/support/hooks.rb:259 0.002

Steps

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 13.544

And I temporarily create a 7200 MiB disk named "install" 0.044

And I plug USB drive "install" 2.456

And I install Tails to USB drive "install" by cloning 3:17.309

Then the running Tails is installed on USB drive "install" 16.178

And there is no persistence partition on USB drive "install" 0.071

Hooks

After features/support/hooks.rb:305 2.045

After features/support/hooks.rb:89 0.132

Tags: @product

4:13.367

Scenario Re-installing Tails over an existing USB installation with a persistent partition

Hooks

Before features/support/hooks.rb:259 0.002

Steps

# We reach this first checkpoint only to ensure that the ' __internal' disk has reached the state (Tails installed + persistent partition set up) we need before we clone it below.

# This first part is done without Tails Installer (install from Tails USB image)

# Note: the "__internal" disk will keep its state across scenarios

# and features until one of its snapshots is restored.

Given I have started Tails without network from a USB drive with a persistent partition enabled and logged in 10.201

And I have started Tails from DVD without network and logged in 8.310

And I clone USB drive "__internal" to a temporary USB drive "install" 1.254

And I plug USB drive "install" 2.697

# This second part is done with Tails Installer, that's what this scenario is about

When I reinstall Tails to USB drive "install" by cloning 3:38.578

Then the running Tails is installed on USB drive "install" 12.267

And there is no persistence partition on USB drive "install" 0.057

Hooks

After features/support/hooks.rb:305 0.960

After features/support/hooks.rb:89 0.139

Tags: @product @uefi

1:52.152

Scenario Booting Tails from a USB drive in UEFI mode

Hooks

Before features/support/hooks.rb:259 0.003

Steps

Given I have started Tails without network from a USB drive without a persistent partition and stopped at Tails Greeter's login screen 11.419

And I power off the computer 0.328

And the computer is set to boot in UEFI mode 0.021

When I start Tails from USB drive "__internal" with network unplugged and I login 1:36.998

Then Tails is running from USB drive "__internal" 0.392

And the boot device has safe access rights 2.940

And Tails has started in UEFI mode 0.052

Hooks

After features/support/hooks.rb:305 0.922

After features/support/hooks.rb:89 0.006

Tags: @product

1:35.728

Scenario Installing Tails with GNOME Disks from a USB image

Hooks

Before features/support/hooks.rb:259 0.003

Steps

Given I have started Tails from DVD without network and logged in 8.100

And I plug and mount a USB drive containing a Tails USB image 40.435

And I create a 7200 MiB disk named "usbimage" 0.036

And I plug USB drive "usbimage" 2.445

And I install a Tails USB image to the 7200 MiB disk with GNOME Disks 44.710

Hooks

After features/support/hooks.rb:305 1.532

After features/support/hooks.rb:89 0.090

Tags: @product

1:26.649

Scenario The system partition is updated when booting from a USB drive where a Tails USB image was copied

Hooks

Before features/support/hooks.rb:259 0.004

Steps

Given a computer 0.138

And I start Tails from USB drive "usbimage" with network unplugged and I login 1:25.458

Then Tails is running from USB drive "usbimage" 0.306

And the label of the system partition on "usbimage" is "Tails" 0.197

And the system partition on "usbimage" is an EFI system partition 0.137

And the FAT filesystem on the system partition on "usbimage" is at least 4000M large 0.157

And the UUID of the FAT filesystem on the system partition on "usbimage" was randomized 0.086

And the label of the FAT filesystem on the system partition on "usbimage" is "TAILS" 0.085

And the system partition on "usbimage" has the expected flags 0.080

Hooks

After features/support/hooks.rb:305 0.670

After features/support/hooks.rb:89 0.005

	Steps						Scenarios			Features
Feature	Passed	Failed	Skipped	Pending	Undefined	Total	Passed	Failed	Total	Duration	Status
Installing Tails to a USB drive	70	0	0	0	0	70	10	0	10	25:33.568	Passed

Feature Report