And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:12.405
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.816
And
I accept adding "cowsay" to Additional Software
4.192
And
Additional Software is correctly configured for package "cowsay"
0.667
And
I shutdown Tails and wait for the computer to power off
4.119
And
I start Tails from USB drive "__internal" with network unplugged
33.347
And
I enable persistence
10.301
And
I configure APT to prefer an old version of cowsay
0.006
And
I disable the tails-virt-notify-user.service user unit
0.040
And
I log in to a new session
6.483
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.190
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.027
And
I prepare the Additional Software upgrade process to fail
0.043
And
the network is plugged
0.037
And
available upgrades have been checked
1.110
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.954
And
I can open the Additional Software configuration window from the notification
2.430
And
I shutdown Tails and wait for the computer to power off
14.976
And
I start Tails from USB drive "__internal" with network unplugged
33.596
And
I enable persistence
10.674
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
7.513
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.151
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.031
And
the network is plugged
0.033
Then
the Additional Software upgrade service has started
0.036
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.055