And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:12.332
And
I configure APT to prefer an old version of cowsay
0.008
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
6.168
And
I accept adding "cowsay" to Additional Software
4.078
And
Additional Software is correctly configured for package "cowsay"
0.545
And
I shutdown Tails and wait for the computer to power off
2.514
And
I start Tails from USB drive "__internal" with network unplugged
32.996
And
I enable persistence
10.294
And
I configure APT to prefer an old version of cowsay
0.008
And
I disable the tails-virt-notify-user.service user unit
0.061
And
I log in to a new session
6.935
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.166
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.036
And
I prepare the Additional Software upgrade process to fail
0.038
And
the network is plugged
0.032
And
available upgrades have been checked
0.057
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.962
And
I can open the Additional Software configuration window from the notification
2.497
And
I shutdown Tails and wait for the computer to power off
7.496
And
I start Tails from USB drive "__internal" with network unplugged
32.697
And
I enable persistence
10.559
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
7.433
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.167
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.029
And
the network is plugged
0.028
Then
the Additional Software upgrade service has started
0.050
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.077