And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:12.378
And
I configure APT to prefer an old version of cowsay
0.006
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
6.001
And
I accept adding "cowsay" to Additional Software
3.974
And
Additional Software is correctly configured for package "cowsay"
0.432
And
I shutdown Tails and wait for the computer to power off
4.092
And
I start Tails from USB drive "__internal" with network unplugged
32.653
And
I enable persistence
10.423
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.036
And
I log in to a new session
7.439
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.135
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.051
And
I prepare the Additional Software upgrade process to fail
0.054
And
the network is plugged
0.033
And
available upgrades have been checked
0.059
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.748
And
I can open the Additional Software configuration window from the notification
2.517
And
I shutdown Tails and wait for the computer to power off
15.008
And
I start Tails from USB drive "__internal" with network unplugged
32.731
And
I enable persistence
10.677
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
7.220
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.180
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.032
And
the network is plugged
0.025
Then
the Additional Software upgrade service has started
0.038
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.066