And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:15.390
And
I configure APT to prefer an old version of cowsay
0.008
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
6.039
And
I accept adding "cowsay" to Additional Software
4.718
And
Additional Software is correctly configured for package "cowsay"
0.627
And
I shutdown Tails and wait for the computer to power off
4.138
And
I start Tails from USB drive "__internal" with network unplugged
33.693
And
I enable persistence
11.345
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.050
And
I log in to a new session
6.888
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.205
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.035
And
I prepare the Additional Software upgrade process to fail
0.045
And
the network is plugged
0.036
And
available upgrades have been checked
0.055
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.889
And
I can open the Additional Software configuration window from the notification
2.682
And
I shutdown Tails and wait for the computer to power off
17.594
And
I start Tails from USB drive "__internal" with network unplugged
34.097
And
I enable persistence
10.668
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
7.696
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.372
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.043
And
the network is plugged
0.035
Then
the Additional Software upgrade service has started
0.045
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.051