And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:13.971
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.993
And
I accept adding "cowsay" to Additional Software
4.189
And
Additional Software is correctly configured for package "cowsay"
0.633
And
I shutdown Tails and wait for the computer to power off
3.944
And
I start Tails from USB drive "__internal" with network unplugged
34.063
And
I enable persistence
11.545
And
I configure APT to prefer an old version of cowsay
0.008
And
I disable the tails-virt-notify-user.service user unit
0.050
And
I log in to a new session
6.950
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.384
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.056
And
I prepare the Additional Software upgrade process to fail
0.044
And
the network is plugged
0.028
And
available upgrades have been checked
2.166
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.816
And
I can open the Additional Software configuration window from the notification
2.585
And
I shutdown Tails and wait for the computer to power off
17.603
And
I start Tails from USB drive "__internal" with network unplugged
35.120
And
I enable persistence
11.512
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
7.674
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.226
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.034
And
the network is plugged
0.030
Then
the Additional Software upgrade service has started
0.043
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.056