And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:26.235
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.131
And
I accept adding "cowsay" to Additional Software
3.963
And
Additional Software is correctly configured for package "cowsay"
0.891
And
I shutdown Tails and wait for the computer to power off
3.957
And
I start Tails from USB drive "__internal" with network unplugged
32.702
And
I enable persistence
11.944
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.047
And
I log in to a new session
7.086
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.177
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.047
And
I prepare the Additional Software upgrade process to fail
0.062
And
the network is plugged
0.024
And
available upgrades have been checked
1.086
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.310
And
I can open the Additional Software configuration window from the notification
2.632
And
I shutdown Tails and wait for the computer to power off
17.669
And
I start Tails from USB drive "__internal" with network unplugged
33.453
And
I enable persistence
11.392
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
7.842
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.147
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.054
And
the network is plugged
0.024
Then
the Additional Software upgrade service has started
0.049
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.045