And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:18.087
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.760
And
I accept adding "cowsay" to Additional Software
2.544
And
Additional Software is correctly configured for package "cowsay"
0.581
And
I shutdown Tails and wait for the computer to power off
4.250
And
I start Tails from USB drive "__internal" with network unplugged
35.208
And
I enable persistence
12.315
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.046
And
I log in to a new session
7.814
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.232
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.037
And
I prepare the Additional Software upgrade process to fail
0.046
And
the network is plugged
0.021
And
available upgrades have been checked
0.073
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.607
And
I can open the Additional Software configuration window from the notification
2.510
And
I shutdown Tails and wait for the computer to power off
12.997
And
I start Tails from USB drive "__internal" with network unplugged
36.204
And
I enable persistence
11.948
And
I configure APT to prefer an old version of cowsay
0.013
And
I log in to a new session
7.154
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.193
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.050
And
the network is plugged
0.028
Then
the Additional Software upgrade service has started
0.064
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.057