And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:17.367
And
I configure APT to prefer an old version of cowsay
0.007
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.541
And
I accept adding "cowsay" to Additional Software
5.092
And
Additional Software is correctly configured for package "cowsay"
0.657
And
I shutdown Tails and wait for the computer to power off
4.008
And
I start Tails from USB drive "__internal" with network unplugged
35.800
And
I enable persistence
12.248
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.051
And
I log in to a new session
7.559
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.187
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.038
And
I prepare the Additional Software upgrade process to fail
0.055
And
the network is plugged
0.034
And
available upgrades have been checked
0.036
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.849
And
I can open the Additional Software configuration window from the notification
2.736
And
I shutdown Tails and wait for the computer to power off
12.714
And
I start Tails from USB drive "__internal" with network unplugged
35.456
And
I enable persistence
13.300
And
I configure APT to prefer an old version of cowsay
0.009
And
I log in to a new session
8.346
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.429
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.057
And
the network is plugged
0.040
Then
the Additional Software upgrade service has started
0.047
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.044