And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:14.972
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.063
And
I accept adding "cowsay" to Additional Software
4.088
And
Additional Software is correctly configured for package "cowsay"
0.535
And
I shutdown Tails and wait for the computer to power off
4.103
And
I start Tails from USB drive "__internal" with network unplugged
32.591
And
I enable persistence
10.722
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.044
And
I log in to a new session
7.272
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.379
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.052
And
I prepare the Additional Software upgrade process to fail
0.036
And
the network is plugged
0.033
And
available upgrades have been checked
0.046
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.311
And
I can open the Additional Software configuration window from the notification
2.604
And
I shutdown Tails and wait for the computer to power off
12.793
And
I start Tails from USB drive "__internal" with network unplugged
34.797
And
I enable persistence
11.757
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
7.657
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.148
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.029
And
the network is plugged
0.031
Then
the Additional Software upgrade service has started
0.053
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.050