And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:16.514
And
I configure APT to prefer an old version of cowsay
0.010
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.862
And
I accept adding "cowsay" to Additional Software
4.991
And
Additional Software is correctly configured for package "cowsay"
0.599
And
I shutdown Tails and wait for the computer to power off
4.179
And
I start Tails from USB drive "__internal" with network unplugged
34.717
And
I enable persistence
11.396
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.061
And
I log in to a new session
7.102
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.223
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.049
And
I prepare the Additional Software upgrade process to fail
0.047
And
the network is plugged
0.035
And
available upgrades have been checked
0.047
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.336
And
I can open the Additional Software configuration window from the notification
2.574
And
I shutdown Tails and wait for the computer to power off
17.882
And
I start Tails from USB drive "__internal" with network unplugged
34.974
And
I enable persistence
11.118
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
8.794
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.190
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.044
And
the network is plugged
0.023
Then
the Additional Software upgrade service has started
0.054
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.052