And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:15.287
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.915
And
I accept adding "cowsay" to Additional Software
5.355
And
Additional Software is correctly configured for package "cowsay"
0.530
And
I shutdown Tails and wait for the computer to power off
2.524
And
I start Tails from USB drive "__internal" with network unplugged
32.901
And
I enable persistence
11.391
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.041
And
I log in to a new session
7.563
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.423
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.032
And
I prepare the Additional Software upgrade process to fail
0.041
And
the network is plugged
0.029
And
available upgrades have been checked
0.050
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.851
And
I can open the Additional Software configuration window from the notification
2.546
And
I shutdown Tails and wait for the computer to power off
13.321
And
I start Tails from USB drive "__internal" with network unplugged
32.573
And
I enable persistence
11.800
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
8.051
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.365
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.035
And
the network is plugged
0.035
Then
the Additional Software upgrade service has started
0.040
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.047