And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:15.602
And
I configure APT to prefer an old version of cowsay
0.006
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.502
And
I accept adding "cowsay" to Additional Software
5.362
And
Additional Software is correctly configured for package "cowsay"
0.565
And
I shutdown Tails and wait for the computer to power off
4.085
And
I start Tails from USB drive "__internal" with network unplugged
32.996
And
I enable persistence
11.182
And
I configure APT to prefer an old version of cowsay
0.006
And
I disable the tails-virt-notify-user.service user unit
0.044
And
I log in to a new session
7.149
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.151
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.042
And
I prepare the Additional Software upgrade process to fail
0.048
And
the network is plugged
0.034
And
available upgrades have been checked
1.090
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.374
And
I can open the Additional Software configuration window from the notification
2.559
And
I shutdown Tails and wait for the computer to power off
12.613
And
I start Tails from USB drive "__internal" with network unplugged
32.908
And
I enable persistence
13.335
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
7.362
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.476
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.032
And
the network is plugged
0.040
Then
the Additional Software upgrade service has started
0.043
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.049