And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:14.361
And
I configure APT to prefer an old version of cowsay
0.004
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.318
And
I accept adding "cowsay" to Additional Software
4.764
And
Additional Software is correctly configured for package "cowsay"
0.529
And
I shutdown Tails and wait for the computer to power off
4.068
And
I start Tails from USB drive "__internal" with network unplugged
33.842
And
I enable persistence
10.811
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.069
And
I log in to a new session
7.709
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.221
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.055
And
I prepare the Additional Software upgrade process to fail
0.046
And
the network is plugged
0.028
And
available upgrades have been checked
1.083
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.328
And
I can open the Additional Software configuration window from the notification
2.478
And
I shutdown Tails and wait for the computer to power off
18.089
And
I start Tails from USB drive "__internal" with network unplugged
32.904
And
I enable persistence
10.771
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
7.571
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.142
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.041
And
the network is plugged
0.022
Then
the Additional Software upgrade service has started
0.042
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.055