And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:21.301
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.269
And
I accept adding "cowsay" to Additional Software
5.061
And
Additional Software is correctly configured for package "cowsay"
0.617
And
I shutdown Tails and wait for the computer to power off
4.090
And
I start Tails from USB drive "__internal" with network unplugged
33.496
And
I enable persistence
11.567
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.044
And
I log in to a new session
8.095
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.193
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.049
And
I prepare the Additional Software upgrade process to fail
0.042
And
the network is plugged
0.044
And
available upgrades have been checked
0.072
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.533
And
I can open the Additional Software configuration window from the notification
2.595
And
I shutdown Tails and wait for the computer to power off
18.501
And
I start Tails from USB drive "__internal" with network unplugged
34.266
And
I enable persistence
12.173
And
I configure APT to prefer an old version of cowsay
0.007
And
I log in to a new session
7.636
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.124
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.033
And
the network is plugged
0.025
Then
the Additional Software upgrade service has started
0.036
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.052