And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:11.355
And
I configure APT to prefer an old version of cowsay
0.004
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
6.082
And
I accept adding "cowsay" to Additional Software
4.037
And
Additional Software is correctly configured for package "cowsay"
0.451
And
I shutdown Tails and wait for the computer to power off
2.542
And
I start Tails from USB drive "__internal" with network unplugged
32.332
And
I enable persistence
10.436
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.048
And
I log in to a new session
7.001
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.165
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.034
And
I prepare the Additional Software upgrade process to fail
0.038
And
the network is plugged
0.022
And
available upgrades have been checked
0.055
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.046
And
I can open the Additional Software configuration window from the notification
2.403
And
I shutdown Tails and wait for the computer to power off
12.517
And
I start Tails from USB drive "__internal" with network unplugged
32.274
And
I enable persistence
10.765
And
I configure APT to prefer an old version of cowsay
0.006
And
I log in to a new session
7.407
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.136
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.038
And
the network is plugged
0.032
Then
the Additional Software upgrade service has started
0.048
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.047