And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:15.241
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.166
And
I accept adding "cowsay" to Additional Software
5.204
And
Additional Software is correctly configured for package "cowsay"
0.530
And
I shutdown Tails and wait for the computer to power off
4.119
And
I start Tails from USB drive "__internal" with network unplugged
32.206
And
I enable persistence
10.783
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.051
And
I log in to a new session
7.586
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.392
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.039
And
I prepare the Additional Software upgrade process to fail
0.049
And
the network is plugged
0.034
And
available upgrades have been checked
1.078
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.330
And
I can open the Additional Software configuration window from the notification
2.551
And
I shutdown Tails and wait for the computer to power off
12.843
And
I start Tails from USB drive "__internal" with network unplugged
33.082
And
I enable persistence
10.716
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
7.491
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.157
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.048
And
the network is plugged
0.038
Then
the Additional Software upgrade service has started
0.038
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.042