And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:15.282
And
I configure APT to prefer an old version of cowsay
0.007
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.754
And
I accept adding "cowsay" to Additional Software
5.028
And
Additional Software is correctly configured for package "cowsay"
0.728
And
I shutdown Tails and wait for the computer to power off
3.988
And
I start Tails from USB drive "__internal" with network unplugged
32.780
And
I enable persistence
10.619
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.056
And
I log in to a new session
7.922
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.192
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.031
And
I prepare the Additional Software upgrade process to fail
0.040
And
the network is plugged
0.024
And
available upgrades have been checked
0.043
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.116
And
I can open the Additional Software configuration window from the notification
2.551
And
I shutdown Tails and wait for the computer to power off
17.697
And
I start Tails from USB drive "__internal" with network unplugged
33.606
And
I enable persistence
11.312
And
I configure APT to prefer an old version of cowsay
0.006
And
I log in to a new session
7.682
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.134
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.044
And
the network is plugged
0.023
Then
the Additional Software upgrade service has started
0.044
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.043