And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:9.641
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.978
And
I accept adding "cowsay" to Additional Software
3.993
And
Additional Software is correctly configured for package "cowsay"
0.489
And
I shutdown Tails and wait for the computer to power off
4.113
And
I start Tails from USB drive "__internal" with network unplugged
31.827
And
I enable persistence
10.211
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.042
And
I log in to a new session
7.117
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.163
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.038
And
I prepare the Additional Software upgrade process to fail
0.046
And
the network is plugged
0.029
And
available upgrades have been checked
1.104
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.828
And
I can open the Additional Software configuration window from the notification
2.522
And
I shutdown Tails and wait for the computer to power off
17.533
And
I start Tails from USB drive "__internal" with network unplugged
32.355
And
I enable persistence
10.009
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
7.441
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.154
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.025
And
the network is plugged
0.031
Then
the Additional Software upgrade service has started
0.040
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.049