And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:15.444
And
I configure APT to prefer an old version of cowsay
0.004
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.081
And
I accept adding "cowsay" to Additional Software
4.068
And
Additional Software is correctly configured for package "cowsay"
0.515
And
I shutdown Tails and wait for the computer to power off
2.525
And
I start Tails from USB drive "__internal" with network unplugged
33.269
And
I enable persistence
10.941
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.040
And
I log in to a new session
7.450
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.223
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.039
And
I prepare the Additional Software upgrade process to fail
0.035
And
the network is plugged
0.030
And
available upgrades have been checked
0.048
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.309
And
I can open the Additional Software configuration window from the notification
2.559
And
I shutdown Tails and wait for the computer to power off
12.822
And
I start Tails from USB drive "__internal" with network unplugged
32.711
And
I enable persistence
11.807
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
7.104
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.179
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.032
And
the network is plugged
0.024
Then
the Additional Software upgrade service has started
0.060
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.048