And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:18.738
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.798
And
I accept adding "cowsay" to Additional Software
5.214
And
Additional Software is correctly configured for package "cowsay"
0.686
And
I shutdown Tails and wait for the computer to power off
4.127
And
I start Tails from USB drive "__internal" with network unplugged
35.413
And
I enable persistence
13.112
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.035
And
I log in to a new session
7.343
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.225
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.041
And
I prepare the Additional Software upgrade process to fail
0.049
And
the network is plugged
0.032
And
available upgrades have been checked
1.126
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.892
And
I can open the Additional Software configuration window from the notification
2.655
And
I shutdown Tails and wait for the computer to power off
18.233
And
I start Tails from USB drive "__internal" with network unplugged
34.696
And
I enable persistence
13.007
And
I configure APT to prefer an old version of cowsay
0.008
And
I log in to a new session
9.521
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.380
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.036
And
the network is plugged
0.033
Then
the Additional Software upgrade service has started
0.047
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.054