And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:17.152
And
I configure APT to prefer an old version of cowsay
0.008
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.341
And
I accept adding "cowsay" to Additional Software
4.974
And
Additional Software is correctly configured for package "cowsay"
0.580
And
I shutdown Tails and wait for the computer to power off
3.824
And
I start Tails from USB drive "__internal" with network unplugged
32.951
And
I enable persistence
11.255
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.050
And
I log in to a new session
7.302
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.150
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.053
And
I prepare the Additional Software upgrade process to fail
0.040
And
the network is plugged
0.024
And
available upgrades have been checked
0.056
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.060
And
I can open the Additional Software configuration window from the notification
2.470
And
I shutdown Tails and wait for the computer to power off
13.200
And
I start Tails from USB drive "__internal" with network unplugged
35.261
And
I enable persistence
11.754
And
I configure APT to prefer an old version of cowsay
0.010
And
I log in to a new session
8.875
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.228
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.043
And
the network is plugged
0.022
Then
the Additional Software upgrade service has started
0.040
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.057