And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:15.147
And
I configure APT to prefer an old version of cowsay
0.006
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.501
And
I accept adding "cowsay" to Additional Software
3.730
And
Additional Software is correctly configured for package "cowsay"
0.584
And
I shutdown Tails and wait for the computer to power off
7.905
And
I start Tails from USB drive "__internal" with network unplugged
35.503
And
I enable persistence
6.293
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.055
And
I log in to a new session
9.317
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.506
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.048
And
I prepare the Additional Software upgrade process to fail
0.061
And
the network is plugged
0.018
And
available upgrades have been checked
1.114
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.025
And
I can open the Additional Software configuration window from the notification
2.580
And
I shutdown Tails and wait for the computer to power off
13.112
And
I start Tails from USB drive "__internal" with network unplugged
35.406
And
I enable persistence
6.016
And
I configure APT to prefer an old version of cowsay
0.024
And
I log in to a new session
10.075
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.266
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.044
And
the network is plugged
0.016
Then
the Additional Software upgrade service has started
0.061
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.052