And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:15.554
And
I configure APT to prefer an old version of cowsay
0.004
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.762
And
I accept adding "cowsay" to Additional Software
3.784
And
Additional Software is correctly configured for package "cowsay"
0.826
And
I shutdown Tails and wait for the computer to power off
7.849
And
I start Tails from USB drive "__internal" with network unplugged
35.736
And
I enable persistence
5.638
And
I configure APT to prefer an old version of cowsay
0.007
And
I disable the tails-virt-notify-user.service user unit
0.054
And
I log in to a new session
9.457
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.202
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.039
And
I prepare the Additional Software upgrade process to fail
0.045
And
the network is plugged
0.019
And
available upgrades have been checked
1.098
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.990
And
I can open the Additional Software configuration window from the notification
2.509
And
I shutdown Tails and wait for the computer to power off
13.288
And
I start Tails from USB drive "__internal" with network unplugged
36.290
And
I enable persistence
5.533
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
9.884
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.199
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.039
And
the network is plugged
0.015
Then
the Additional Software upgrade service has started
0.042
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.048