And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:19.659
And
I configure APT to prefer an old version of cowsay
0.029
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
25.656
And
I accept adding "cowsay" to Additional Software
6.063
And
Additional Software is correctly configured for package "cowsay"
0.873
And
I shutdown Tails and wait for the computer to power off
6.361
And
I start Tails from USB drive "__internal" with network unplugged
59.078
And
I enable persistence
11.564
And
I configure APT to prefer an old version of cowsay
0.023
And
I disable the tails-virt-notify-user.service user unit
0.087
And
I log in to a new session
39.293
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.152
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.051
And
I prepare the Additional Software upgrade process to fail
0.070
And
the network is plugged
0.086
And
available upgrades have been checked
1.095
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.270
And
I can open the Additional Software configuration window from the notification
3.178
And
I shutdown Tails and wait for the computer to power off
2:2.388
And
I start Tails from USB drive "__internal" with network unplugged
58.139
And
I enable persistence
13.523
And
I configure APT to prefer an old version of cowsay
0.026
And
I log in to a new session
38.059
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.013
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.055
And
the network is plugged
0.073
Then
the Additional Software upgrade service has started
0.171
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.081