And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:23.903
And
I configure APT to prefer an old version of cowsay
0.029
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
26.117
And
I accept adding "cowsay" to Additional Software
6.556
And
Additional Software is correctly configured for package "cowsay"
0.903
And
I shutdown Tails and wait for the computer to power off
6.429
And
I start Tails from USB drive "__internal" with network unplugged
1:0.126
And
I enable persistence
11.262
And
I configure APT to prefer an old version of cowsay
0.023
And
I disable the tails-virt-notify-user.service user unit
0.093
And
I log in to a new session
38.813
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
31.900
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.073
And
I prepare the Additional Software upgrade process to fail
0.064
And
the network is plugged
0.079
And
available upgrades have been checked
2.217
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.123
And
I can open the Additional Software configuration window from the notification
2.498
And
I shutdown Tails and wait for the computer to power off
18.434
And
I start Tails from USB drive "__internal" with network unplugged
58.998
And
I enable persistence
10.560
And
I configure APT to prefer an old version of cowsay
0.025
And
I log in to a new session
40.172
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
32.210
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.063
And
the network is plugged
0.075
Then
the Additional Software upgrade service has started
0.192
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.088